SEARCH:
Pick Your Poison!
Shop by Jeep Model!
Shop by Project!

Call Poison Spyder:

1-800-776-0767

Monday-Friday

8 AM to 5 PM Pacific

Email Poison Spyder:

[email protected]





  Home > Bumpers & Stingers > BFH™ Front Bumpers >

TJ BFH Front Bumper - Trail Stinger - Tabs
TJ BFH Front Bumper - Trail Stinger - Tabs

Scroll down for additional photos below product description.




 

PN: 14-16-020-DS

 
Poison Spyder Customs BFH™ front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH™ bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH™ bumper features an integrated winch mount and one-piece design.

Customize your BFH™ bumper with several different Stinger/Bar options, Winch Fairlead Mount, and Heavy Duty Shackle Tabs:

The optional Brawler Bar is a lower-profile Stinger, fashioned after the 2-bend Stinger featured on our Original RockBrawler bumper for JK. The Brawler Bar features the most versatile combination of trail protection and a lower profile for easier access to the engine compartment, fitment into garages and trailers, etc. Plus it looks bad-ass! The Brawler Bar extends 7.4" forward from the front edge of the bumper, and 9.8" high from the top surface of the bumper.

The optional Trail Stinger™ is similar in proportion to the famous Poison Spyder Trail Stinger™. This time-honored design has proven itself on hundreds of Jeeps over the past decade, providing simple, clean lines along with a measure of forward-flop protection. The Trail Stinger™ extends 13.4" forward from the front edge of the bumper, and 17" high from the top surface of the bumper.

The optional Comp Stinger™ for the BFH™ front bumper matches the lines of our stand-alone Comp Stinger™s. For those getting into the more hard-core aspects of the sport, the Comp Stinger™ provides even better forward-roll prevention, as well as increased protection of the radiator area and engine compartment in the event of a rollover. The Comp Stinger™ extends 17.6" forward from the front edge of the bumper, and 21.9" high from the top surface of the bumper.

The optional Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH™ bumper to result in zero loss in approach angle.

The optional Winch Fairlead Mount is a separate piece (bolt-on, not weld-on) that mounts between your winch and the BFH™ bumper to provide a secure mounting surface for the winch fairlead (find it in the "Related Items" section below).

The JK BFH Disco Skid is an optional bolt-on skid plate to protect the factory electric swaybar disconnect motor on JK's. In stock form this motor hangs low, making it vulnerable to rocks and trail hazards. The BFH Disco Skid protects it, but also comes with hardware and instructions to rotate the motor upward, further out of harm's way. Like the BFH bumper, the Disco Skid is made of CNC laser-cut 3/16" plate steel and is designed to be a great looking, functional addition to the JK BFH bumper.

This product ships as bare steel—it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.

Whether you keep it simple or customize it with all the options, the BFH™ front bumper is a serious bumper for hardcore wheeling!


You may also like...
Hawse Fairlead Light Mount Roller Fairlead Light Mount Aluminum Hawse Winch Fairlead 3/4" Recovery Shackle

Add

Add

Add

Add
Hawse Fairlead Light Mount Roller Fairlead Light Mount Aluminum Hawse Winch Fairlead 3/4" Recovery Shackle
Winch Fairlead Mount

Add
Winch Fairlead Mount

Average Customer Review: Average Customer Review: 3.5 of 5 3.5 of 5 Total Reviews: 5 Write a review.

  0 of 0 people found the following review helpful:
 
4 of 5 Tj trail stinger tabs Review May 31, 2017
Reviewer: Donald Cheyne from lagrange, GA United States  
The bumper looks great now that i got it on my jeep.  It was a pain to put on however.  The bumper would not got on the frame straight out of the box. One of the welds on the inside of the bumper was too thick. After I grinded it with a dremmel and beat the bumper on with a rubber mallet it did fit.  Looks great now that it's painted and installed. It's strong as can be, I just bumped a tree with it last weekend and it took it like champ.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 My TJ April 28, 2017
Reviewer: Travis Linzy from Collinsville, OK United States  
Love this bumper and hope to fine the rear on on sell soon.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
3 of 5 Great bumper- Communication w/PS poor April 4, 2016
Reviewer: FLDTYjeepGRL from St. Louis, Missouri  
I love my new front bumper! Had it powder coated and looks great on the Jeep. As far as the ordering/shipping communication process...I received an email thanking me for my purchase and gave me an order number. The email also stated that I would get a shipping notice along with tracking information. After a week of not receiving any sort of shipping notice, I called PS. When I spoke to someone they said they were "delayed" getting out the notices, took 10 minutes to find/verify my order and was informed my shipment should be arriving Thursday, possibly. I still never receive any notice, even after I called. Of course, my bumpers were not delivered on "Thursday" and instead arrived while I wasn't home and had no notification they were delivered. I came home after work, in the dark to over $600 worth of bumpers on my front porch. Again, great product which is why my review is average instead of poor due to lack of promised communication, otherwise excellent.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
1 of 5 I wouldn't know February 14, 2016
Reviewer: WIlliam Durns from Sparks, NV United States  
I received the wrong bumper. Shipped it back and still waiting for either a refund or the this bumper.... :(

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Quick shipping and easy install January 16, 2016
Reviewer: Michael Shephard from Slidell, LA United States  
I purchased the bumper as an upgrade for my TJ. After purchased it arrived quickly. The instructions made installation easy. It fit perfectly. All I had to do was add my winch and I was done. It looks great and has performed well.

Was this review helpful to you?


Browse for more products in the same category as this item:

Bumpers & Stingers > BFH™ Front Bumpers
Jeep TJ - LJ • 1997-2006 > TJ/LJ Bumpers & Stingers
Bumpers & Stingers
Jeep TJ - LJ • 1997-2006
 

Poison Spyder Customs, Inc. is a Proud Member Of:

Poison Spyder urges our customers and ALL 4x4 enthusiasts to join the fight to keep our trails open, and maintain public access to public lands! Please join and support these organizations as well as your local clubs and land-use advocacy groups.

 About Us
 Contact Us
 Privacy Policy
 Customer Service
 Find A Dealer
 Tech Library
 Send Us Feedback
 RallyVenture