SEARCH:
Pick Your Poison!
Shop by Jeep Model!
Shop by Project!

Call Poison Spyder:

1-800-776-0767

Monday-Friday

8 AM to 5 PM Pacific

Email Poison Spyder:

[email protected]





  Home > Bumpers & Stingers > BFH™ Front Bumpers >

TJ BFH Front Bumper - Brawler Bar - Tabs
TJ BFH Front Bumper - Brawler Bar - Tabs

Scroll down for additional photos below product description.




 

PN: 14-16-020-DB

 
Poison Spyder Customs BFH™ front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH™ bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH™ bumper features an integrated winch mount and one-piece design.

This product ships as bare steel—it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.

Customize your BFH™ bumper with several different Stinger/Bar options, Winch Fairlead Mount, and Heavy Duty Shackle Tabs:

The optional Brawler Bar is a lower-profile Stinger, fashioned after the 2-bend Stinger featured on our Original RockBrawler bumper for JK. The Brawler Bar features the most versatile combination of trail protection and a lower profile for easier access to the engine compartment, fitment into garages and trailers, etc. Plus it looks bad-ass! The Brawler Bar extends 7.4" forward from the front edge of the bumper, and 9.8" high from the top surface of the bumper.

The optional Trail Stinger™ is similar in proportion to the famous Poison Spyder Trail Stinger™. This time-honored design has proven itself on hundreds of Jeeps over the past decade, providing simple, clean lines along with a measure of forward-flop protection. The Trail Stinger™ extends 13.4" forward from the front edge of the bumper, and 17" high from the top surface of the bumper.

The optional Comp Stinger™ for the BFH™ front bumper matches the lines of our stand-alone Comp Stinger™s. For those getting into the more hard-core aspects of the sport, the Comp Stinger™ provides even better forward-roll prevention, as well as increased protection of the radiator area and engine compartment in the event of a rollover. The Comp Stinger™ extends 17.6" forward from the front edge of the bumper, and 21.9" high from the top surface of the bumper.

The optional Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH™ bumper to result in zero loss in approach angle.

The optional Winch Fairlead Mount is a separate piece (bolt-on, not weld-on) that mounts between your winch and the BFH™ bumper to provide a secure mounting surface for the winch fairlead (find it in the "Related Items" section below).

The JK BFH Disco Skid is an optional bolt-on skid plate to protect the factory electric swaybar disconnect motor on JK's. In stock form this motor hangs low, making it vulnerable to rocks and trail hazards. The BFH Disco Skid protects it, but also comes with hardware and instructions to rotate the motor upward, further out of harm's way. Like the BFH bumper, the Disco Skid is made of CNC laser-cut 3/16" plate steel and is designed to be a great looking, functional addition to the JK BFH bumper.

Whether you keep it simple or customize it with all the options, the BFH™ front bumper is a serious bumper for hardcore wheeling!


You may also like...
Roller Fairlead Light Mount 3/4" Recovery Shackle Hawse Fairlead Light Mount Winch Fairlead Mount

Add

Add

Add

Add
Roller Fairlead Light Mount 3/4" Recovery Shackle Hawse Fairlead Light Mount Winch Fairlead Mount
Aluminum Hawse Winch Fairlead

Add
Aluminum Hawse Winch Fairlead

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 5 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 Still looks good April 16, 2020
Reviewer: michael from jesup, GA United States  
I bought this bumper back in 2014 for my 02 TJ and not once have I ever regretted the decision. Its never gotten in the way on an approach in any way and the brawler bar comes in handy for any number of reasons when winching. Other than a few, err make that alot of scratches it looks exactly like it did the day I got it. I did manage to push in a part of the laser cut spyder cutout just a bit some where along the line but its hardly noticeable. If you dont get this PS bumper do your self a favor and get one of their bumpers because they are as tough as you could want and they look good too.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Bada** looks, Solid construction. April 1, 2016
Reviewer: Anonymous Person from AZ  
This bumper is pure beef, pre drilled mounting pattern for a winch, D-Rings tabs are thick and welded on thoroughly. And speaking of,  the welds on the bumper over all are perfect, obviously done by someone who knows what they're doing. Looks awesome on my TJ, brawler bar is made from *thick* tubing. Highly recommend.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 BFH Front Bumper February 21, 2016
Reviewer: Chris from Wilmington, NC United States  
I have been a Poison Spyder customer since back in the days when they were based in Colorado.  The BFH Bumper is exactly what I expected.  Went on easy and looks great.


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great Product!! February 11, 2016
Reviewer: Timothy G from Fayetteville, NC United States  
I installed this on my 2006 Jeep TJ with ease.  Its is well built and supremely heavy duty.  I highly recommend Poison Spyder products!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Great craftsmanship and design but poor fit November 18, 2015
Reviewer: Stuart Nelson from Sacramento, CA United States  
bumper arrived well packaged in expanding foam to prevent shipping damage. The bumper is very durable and the welds are a work of art. Fittament was a little poor and I had to do some grinding to get it completely over the frame horns and get the mounting holes to line up. Still off so I used a die grinder to open up the lower mounting holes but for the price I was not happy I had to do some work to get it to fit. If it would have fit better I would have rated 5 stars. I would have asked for a replacement but I hate returning things as its always a hassle but I spent hours getting it to fit. Looks good on the TJ though.

Was this review helpful to you?


Browse for more products in the same category as this item:

Bumpers & Stingers > BFH™ Front Bumpers
Jeep TJ - LJ • 1997-2006 > TJ/LJ Bumpers & Stingers
Bumpers & Stingers
Jeep TJ - LJ • 1997-2006
Gifts Under $600
Daddy Longlegs
 

Poison Spyder Customs, Inc. is a Proud Member Of:

Poison Spyder urges our customers and ALL 4x4 enthusiasts to join the fight to keep our trails open, and maintain public access to public lands! Please join and support these organizations as well as your local clubs and land-use advocacy groups.

 About Us
 Contact Us
 Privacy Policy
 Customer Service
 Find A Dealer
 Tech Library
 Send Us Feedback
 RallyVenture