Poison Spyder raises the bar for Jeep fender armor—DeFenders™ are the next evolutionary step beyond "tube fenders".
JUMP TO: Top of Page | Product Description | Image Galleries | Features & Benefits | Frequently Asked Questions | Competitive Comparisons | Related Products
Product Description
Solid, "Tubeless" Construction
DeFenders™ vs. "tube fenders" they're better! Much of the Jeep armor industry was built upon Poison Spyder's original Tube Fender design, which has been borrowed, copied, and in some cases even improved upon, by many of our competitors. But now the state of the art in Jeep fender armor takes a giant leap forward with the DeFender™ product line. Rather than tube, the outer edges of the DeFender™ are brake-formed into a rugged 3-sided rub rail.
Increased Front Tire Clearance
3" Tapered Flare Zero Flare and Negative Flare versions.
Optional Inner Fender Kit DeFender™ Inner Fender Kit . This is a 3-piece (per side) bolt-together assembly, made of CNC laser cut aluminum sheet. Please note that no accessory mounting holes or brackets are provided, as each installation is left to the discretion of the installer to decide where to mount components. Most stock inner fender-mounted components can be re-mounted to the DeFender™ Inner Fenders by simply drilling a hole and/or fabricating a simple bracket.
Easy Access & Side Plate Options DeFender™ Side Inserts are CNC laser cut from 1/8" aluminum plate. The Spyder logo cut-out acts as an air vent to promote airflow through the engine bay. The Side Inserts are designed to bolt to the inside surface of the DeFender™, using the supplied stainless steel button head hardware. For those who want more substantial armor protection, the DeFender™ Full Length Side Plates extend from the fender flare rearward to the door opening, and from the top of the Rocker Knockers™ up to the hood line. These Full Length Side Plates also provide extra bracing for the DeFender™ against frontal impacts, helping to prevent buckling of the weaker, stock tub sheetmetal just rearward of the armored fender. DeFender™ Full Length Side Plates are CNC laser cut from 3/16" 6061-T6 aluminum plate. Bolt holes are countersunk so that the supplied flat head stainless steel hardware lies flush with the plate's surface. The forward edge is cut to fit the enlarged wheel opening of Poison Spyder DeFenders™, while the lower edge is is cut to nest against Poison Spyder Rocker Knockers™ or Ricochet Rockers™ (NOTE: the angle of the forward edge of the Full Length Side Plates may not precisely align with the forward edge of older versions of Rocker Knockers™ and Ricochet Rockers™—newer, DeFender™-specific Rocker Knockers™ or Ricochet Rockers™ are designed to match the angle of this forward edge more closely). DeFender™ Side Inserts and DeFender™ Full Length Side Plates are sold separately (must be added to your cart as a separate item), so you may choose which one best matches your needs (select one or the other, but not both).
Accepts Hi Intensity LED Marker Lamps 3/4" LED Marker Lamp . These lamps are available separately through Poison Spyder Customs, and are DOT approved for automotive use. Note that these LED marker lamps may be wired to function as either a marker/running lamp or as a turn signal, but not as both.
TJ Battery Lift Bracket DeFenders™ DeFender's™
Customer Builds, Photos, Installs
• Poison Spyder Build TJ JeepForum.com
• Poison Spyder Build TJ WranglerForum.com
• DeFender install pictures (lots) WranglerForum.com
• Poison Spyder goes to KOH with DJ!! Pirate4x4.com
• Poison Spyder DeFenders JeepForum.com
• Savvy/Currie/SFR KOH Stock Class Jeep Pirate4x4.com
• Poison Spyder DeFender Installation JeepForum.com
This product ships as bare steel—it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.
JUMP TO: Top of Page | Product Description | Image Galleries | Features & Benefits | Frequently Asked Questions | Competitive Comparisons | Related Products
Image Galleries
Here is our entire collection of images for this product. We're constantly adding more photos so check back often if you don't see a shot with a specific angle or installation you are looking for. Do you own this item already? We'd love to have your photos to add to our collection. Just send the hi-res images via email to [email protected]
JUMP TO: Top of Page | Product Description | Image Galleries | Features & Benefits | Frequently Asked Questions | Competitive Comparisons | Related Products
Features & Benefits
At Poison Spyder we strive to build superior features into every aspect of each product we make. Every feature has a reason for being included in the design. Here are a list of the most important of these features, along with an explanation of the benefits of each. Consider these important factors when shopping for products, and compare the competition to Poison Spyder's features and benefits!
Feature
Benefit
Fabricated entirely from 3/16" plate
The Defender™ is the next evolutionary step beyond "tube fenders". CNC laser cutting and precision brake-forming yield a stronger, more functional, better-looking design than the tired, out-dated tube fender.
Beefy 3/16" plate in the most vulnerable "rub" points
Old school tube fenders are constructed with tubing at the outermost edge, where the fender meets the rocks in hard-core wheeling. While PSC's former Tube Fenders were made of DOM tubing, most are made with weaker HREW tubing—and all are only .120" wall thickness, or just under 1/8". Like the entire assembly, the outer edges of the DeFender™ are made of 3/16" (.188") thick material, providing a much stronger defense against rocks and trail hazards.
"Return" on underside of fender in wheel opening
Only one competitor manufactures a fender that's anything like the Defender™—fabricated entirely of plate with no tubing—but their design leaves a vertical edge of the metal pointed downward, right at the tire. The Defender™ has an extra "return", or lip along the underside of the fender, which provides better protection from cutting into a fully stuffed tire, while also lending extra strength to the outer edge of the fender, where it is most likely to come in contact with rocks, canyon walls, trees, etc.
Increased tire clearance
Even on the non-highline version, the Defender™ provides a much larger wheel opening than stock or most competitors' tube fenders. The back of the wheel opening, where larger tires tend to rub when the steering is at full-lock, is 3" further back compared to typical tube fenders.
Easy access for installation
Access holes in the side of the Defender™ make it easy to access the area between the wheel well and the firewall during installation. After installation, these holes are filled with the bolt-in fill plates or covered with the optional Side Armor plates.
Optional Side Armor
The optional Side Armor pieces bolt to the back cover of the Defender™ and extend rearward to the door opening, across the body seam between the fender and the firewall. As they are designed to fit snugly with Poison Spyder's Rocker Knockers™, they extend body armor protection up the side of the Jeep. They also help to distribute the shock loads that may accur from frontal impacts to the Defender™, which might otherwise buckle the tub sheetmetal.
"Negative Flare" version
For extreme clearance on hard core rock crawlers, the Defender&trde; is available with a "negative flare", meaning that it extends from the Jeep's body less than the stock fender. The outer edge of the Negative Flare version tapers inward, staying within just a few inches of the hood line.
Fully integrated Standard or Full Width Flares
Rather than a separate, bolt-on piece that cost hundreds of dollars more, Defenders™ are available with fully integrated flares of either "standard width" (3") or "full width" (6"). These aren't just an added-on piece—each Defender™ is built from the ground up as a seamless, one-piece fender with integrated flare.
Able to re-use OE inner fenders
Why deal with the cost or hassle of replacing your existing inner fenders? Defenders™ are designed to work with your Jeep's OE inner fenders, saving cost as well as the hassle of removal/installation/relocation of all of your under-hood gear.
Optional DeFender Inner Fenders
For those who prefer a complete, bolt-in installation without having to cut and retain the stock inner fenders, the DeFender Inner Fender Kit provides a clean, functional inner fender addition to the DeFenders.
Steel or Aluminum
Defenders are available in either heavy duty steel or light weight aluminum (both 3/16" thick). We recommend steel for those Jeeps whose fenders are frequently in contact with the rocks. For those needing a great looking, light weight fender that strong but not as hard core as the steel ones, aluminum is a great alternative.
JUMP TO: Top of Page | Product Description | Image Galleries | Features & Benefits | Frequently Asked Questions | Competitive Comparisons | Related Products
Frequently Asked Questions
Got a question about this product? We've tried to cover the most frequently asked ones below. You may also want to check our Master FAQ Page for more general questions about Poison Spyder, our products, ordering and shipping. Don't see an answer to your question? Ask our sales department by email at [email protected]
Q: Can I order it powder coated?
A: At this time we are not offering powder coat for this product. If we are able to devise suitable packaging which will adequately protect the powder coat finish during transit, we may add a powder coat option in the future.
Q: How do I choose between steel and aluminum?
A: It depends on how you use your Jeep, what kind of wheeling you do, and which product you're considering. For armor used on Jeeps that get wheeled hard in extreme rock terrain, we prefer steel because it is simply more durable, less susceptible to bending or gouging, and will distribute impact loads over wider areas better. But the trade-off is that steel is of course heavier. There are some who prefer a lighter rig even in hard core terrain, opting to use aluminum but accepting the greater risk of damage in order to gain the performance of a lighter rig. For these folks, if their driving style is more finessed and patient, aluminum might be the better choice. For vehicles being used primarily on the street, and light trail duty, the aluminum products might be the better choice solely for the weight savings.
JUMP TO: Top of Page | Product Description | Image Galleries | Features & Benefits | Frequently Asked Questions | Competitive Comparisons | Related Products
Competitive Comparisons
It's a crowded market with a lot of manufacturers competing to earn your business. Here we've assembled a chart with a few of the key competing products in this product category, to assist with your shopping. We've tried to make sure this information is as accurate as possible, but if you spot an inaccuracy on this chart please let us know at [email protected]
MFG & Prod Name
Base Price
Neg Flare
Standard Width Flare
Full Width Flare
HighLine
Construction
Inner Fender
Side Panel Access
PSC Defender
$509.00
$509.00
3" +$50
N/A
Coming Soon!
3/16" Plate Steel
Re-Use OE
Yes
PSC Tube Fender (Old School)
$549.00
N/A
3" +$50
N/A
N/A
1.5" X .120 DOM & 1/8" Plate Steel
Re-Use OE
No
Nemesis Crawler
$325.00
N/A
4.5" +$275
N/A
N/A (See Hydra)
3/16" Steel or 3/16" Alum +$50
Re-Use OE
No
Nemesis Loki
$525.00
N/A
4.5" +$325 (Bolt-on)
6.5" +$350 (Bolt-on)
N/A (See Hydra)
3/16" Aluminum
OPT +$325
No
Nemesis Hydra
$550.00
N/A
4.5" +$325 (Bolt-on)
6.5" +$350 (Bolt-on)
Standard
3/16" Aluminum
OPT +$350
No
TNT (Treks) Phantom
$530.00
N/A
3" +$50 4.5" +$70
6" +$96
+$100
Unspecified Tube & Sheetmetal
Integrated
No
Gen-Right
$500.00
N/A
4" +$50
6" +$130
Same Price
1.5" X .120 Tube & 1/8" Plate Steel OR Alum +$100
Re-Use OE
Yes
Metal Cloak
$600.00
N/A
1.5" +$159
6" +$249
N/A (Arched Design)
1.5" X .120 Tube & 1/8" Plate Steel
Included
Yes
Smittybilt Tube Fender
$330.00
N/A
3" +$100
N/A
N/A
Unspecified Tube & Sheetmetal
Re-Use OE
No
Pure Jeep Renegade
$500.00
N/A
4.5" Standard
N/A
N/A
1.5" X .120 Tube & 1/8" Plate Steel
Re-Use OE
No
Sinister Fab Works H-Line
$711.00
N/A
3" +$105
N/A
Standard
Unspecified Tube & Sheetmetal
Included
No
Sniper Fabworks
$330.00
+$55
3" +$135
6" +$185
N/A
1.5" X .120 Tube & 1/8" Plate Steel
Re-Use OE
No
Rokmen Hi-Line
$325.00
N/A
4" +$75
N/A
Standard
Unspecified Tube & Sheetmetal
Opt +$195
Yes
Blue Torch Fab
$160.00
N/A
N/A
N/A
N/A
1.25" X .120 Tube & 1/8" Plate Steel
N/A
No
JUMP TO: Top of Page | Product Description | Image Galleries | Features & Benefits | Frequently Asked Questions | Competitive Comparisons | Related Products
Related Products
Don't forget any of these related items you might be interested in...
Front 
