Pick Your Poison!
Shop by Jeep Model!
Shop by Project!

Call Poison Spyder:



8 AM to 5 PM Pacific

Email Poison Spyder:

[email protected]

  Home > Bumpers & Stingers >

DIY Rear Stinger Tire Carrier
Jeep Rear Stinger Tire Carrier Bumper

Scroll down for additional photos below product description.


PN: 14-13-010

The Poison Spyder Rear Stinger Tire Carrier is the ultimate rear bumper for hard core rock crawling. Like many Poison Spyder original designs, the Rear Stinger concept has been copied by many manufacturers, but none come close to the quality, function, performance and awesome appearance of original. Built for light weight, high clearance, ease of use and a measure of rear-flop protection, the Poison Spyder Rear Stinger is designed for those who spend most of their time in the rocks and need a tire carrier that meets the challenge.

The Rear Stinger is basically a fold-down spare tire carrier. By pulling the two upper pins, the tire carrier can swing down, making loading and unloading of huge off-road tires easier. Simply roll the tire up into the carrier, secure it with the provided 3-Way Spare Tire Strap, then swing the carrier back up and pin it in place. The main components are fabricated from NC-bent DOM tubing and CNC laser-cut plate steel.

This part number is for the "DIY" Rear Stinger Tire Carrier without the Lower Mount Plate. This would be useful for those who would like to use the Poison Spyder Rear Stinger with their existing bumper, or for adapting it for use on Jeep models and other 4X4's for which we do not yet make a model-specific kit. Note that the kit does NOT provide mounting tabs to attach the Stinger to your bumper, so you will need to fabricate or source these tabs separately. Note that the upper attachment arms are located at the correct width and height for mounting to a TJ without a body lift.

The Tire Carrier includes an integrated skid plate with laser cut lightning holes and Spyder logo. It also has an integrated license plate mount located in the center of the carrier. Tabs for the lower straps and a loop for the upper strap provide a secure mount for the 3-Way Spare Tire Strap.

The Upper Corner Mounts are designed to work with or without Poison Spyder Crusher Corners™ for TJ, LJ, YJ and CJ. (we recommend using them with Crusher Corners™). They mount using the bolt locations already in place for your Crusher Corners™. The left side Upper Corner Mount includes a convenient CB antenna mount. The Tire Carrier attaches to the Upper Corner Mounts using urethane bushings and easy-to-remove hitch pins.

The Poison Spyder 3-Way Spare Tire Strap securely holds the spare tire in place during the most rigorous four-wheeling. The use of a strap allows virtually infinite adjust-ability for any size tire, while allowing quick, easy access to the spare tire without having to use any extra tools. All of these reasons are why similar straps are routinely used for spare tire hold-down duty in off-road racing. Heavy duty ratchet lets you easily adjust, tighten and release tension. Made of high quality nylon webbing with an embroidered Poison Spyder tag.

This product ships as bare steel—it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.

IMPORTANT NOTE: This item is shipped on a pallet via truck freight. Shipping will NOT be calculated by this shopping cart. We will contact you to verify the shipping costs before processing your order (your card will not be charged until you have been notified of and agreed to the shipping costs).

You may also like...
3/4" Recovery Shackle

3/4" Recovery Shackle

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 4 Write a review.

  0 of 0 people found the following review helpful:
5 of 5 survey July 8, 2016
Reviewer: paul madrid from orange, CA United States  
very helpful and accommodating.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 diy tire carrier December 10, 2015
Reviewer: Mark Denning from Louisville, KY United States  
nice product,,well made,,great customer service,, had to rework a bit to custom fit willys but all worked out fine ,,thanks

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Wicked!! June 4, 2012
Reviewer: John Sherwin from Wixom, MI United States  
Love the design and craftsmanship.

Was this review helpful to you?

  0 of 1 people found the following review helpful:
4 of 5 Rear Stinger November 9, 2010
Reviewer: EHR/atraxion from Donnacona, QC Canada  
Nice that this tings came back, and improved! I was not convinced at first, but the ratchet type spare holder is a great way to secure a full size tire and wheel, to this attractive design carrier!
It's simple, and it really works!

Was this review helpful to you?

Browse for more products in the same category as this item:

Bumpers & Stingers
Jeep TJ - LJ • 1997-2006
Bumpers & Stingers > Spare Tire Carriers
Jeep TJ - LJ • 1997-2006 > TJ/LJ Bumpers & Stingers

Poison Spyder Customs, Inc. is a Proud Member Of:

Poison Spyder urges our customers and ALL 4x4 enthusiasts to join the fight to keep our trails open, and maintain public access to public lands! Please join and support these organizations as well as your local clubs and land-use advocacy groups.

 About Us
 Contact Us
 Privacy Policy
 Customer Service
 Find A Dealer
 Tech Library
 Send Us Feedback
Reviewed by Accessible360