JK Brawler FULL Width Rear Bumper - Tire Carrier - Lights - Tabs | Jeep Wrangler JK Rear Bumpers

Home > Bumpers & Stingers >

JK Brawler FULL Width Rear Bumper - Tire Carrier - Lights - Tabs

Scroll down for additional photos below product description.

PN: 17-62-050-DL

The Brawler™ FULL Width Rear Bumper for JK provides the highest ground and tire clearance possible in a full width JK rear bumper. This bumper brings Poison Spyder form and function to the overlander market, and to those who would like to keep their stock JK fender flares. The bumper extends to the full width of the stock flares, to integrate with them cleanly while protecting them from trail hazards. This configuration includes the Single-Action spare tire carrier, recessed mounts for LED reverse lights high clearance recovery shackle tabs and a receiver hitch. Like all bumpers in the Brawler product line, the FULL Width rear bumper is fabricated from 3/16" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. This product ships as bare steel—it will need to be painted or powder coated prior to final installation. We do not yet offer a powder coat option for this item.

Product Description

FULL Width
Finally there is a Full Width front bumper that incorporates Poison Spyder's attention to form and function, in an elegant package that integrates perfectly with the stock Jeep or aftermarket stock replacement fender flares. While this bumper was designed for those Jeep enthusiasts who prefer a more "overland" style and function to their Jeep build, or want to keep their factory flares, we couldn't simply make a full-width monstrosity like so many unsightly bumpers already on the market. Even though it's full width, and less likely to be used on the hard core rock trails, we still felt compelled to design it with maximum approach angle, ground clearance and tire clearance possible while still extending out to the full width of the stock flares to protect the corners of the Jeep. The outriggers that extend to the edge of the flare are kept as tight to the original Brawler's high clearance lines as possible, tapering outward toward the ends. This allows the best departure angles possible in a full width rear bumper, minimizing the chances of hanging up as the rear tire comes off a rock or ledge. The outriggers are designed to integrate visually with the stock fender flares, in a clean, almost "factory" look.

Bumper Plate Steel Construction
Every Brawler bumper starts out as a sheet of 3/16" plate steel. Our CNC laser cutter precisely cuts the flat pattern as designed in our 3D CAD system. Next the bumper parts are CNC brake-formed into the high clearance, multi-faceted pieces that will become a finished bumper. Highly skilled tradesmen weld each bumper together using precision-engineered assembly fixtures for a perfect fit. Finally the complete bumper is sent through our finishing department for final appearance surfacing and quality control checks.

Single-Action Spare Tire Carrier
The Spare Tire Carrier's Single-Action-Opening feature is a huge convenience for when you're trying to open the tailgate and tire carrier with one hand, when you've got an armload of gear or groceries in the other. Rather than latching to itself, the tire carrier is tethered to the tailgate so that they open and close in tandem. A custom designed tie-rod assembly, bumper mechanism and Tramp Stamp™ keep the two pieces perfectly aligned when open, but tight and rattle-free when closed.

Tire Carrier Plate Steel Construction
The RockBrawler™ II Spare Tire Carrier is fabricated entirely from CNC laser cut, precision brake-formed plate steel. The pieces are expertly welded together in a specially designed assembly fixture to ensure consistent fit and quality. A web gusset design is cut into the corner of the tire carrier to provide a little Poison Spyder flare.

Extreme Duty Hinge Assembly
The extreme duty hinge assembly includes a precision CNC machined spindle and housing, with a pair of high quality Timken tapered roller bearings to provide smooth operation under the heaviest loads A spindle seal at the bottom of the hinge assembly keeps your lubrication in, and dirt and water out. The hinge assembly is capped with a CNC machined billet aluminum cap with the Spyder emblem machined in.

2-Way Adjustable Tire Mount
The tire mount is adjustable up and down, as well as in and out, to accomodate a wide variety of tire sizes up to 39". The adjustability allows the tire to be mounted as low as possible for any tire size, to keep a low center of gravity.

License Plate Relocation Mount
The included license plate mount places the license plate at the center of the spare tire, for those who choose to move it there. Unlike the original RockBrawler™ rear bumper, the RockBrawler™ II Rear Bumper with Tire Carrier does NOT obstruct the placement of the stock license plate frame, so the installer may choose to leave it in the stock location or move it to the center of the rear tire using the included bracket. We recommend relocating it, as the stock mount sticks out significantly from the side of the Jeep and is just begging to be torn off by a rock along the trail. If relocating the license plate, our License Plate Delete Cover (p/n 17-04-112) and LED License Plate & 3rd Brake Light (p/n 41-04-LP6) will be useful in completing the relocation.

Recessed LED Pod Light Mounts
This configuration of the JK Brawler FULL Width Rear Bumper includes provisions for mounting a pair of Rigid Industries Dually (or similar) LED pod lights for use as backup lamps or simply as illumination toward the rear of the Jeep for night runs, after-dark repairs or work lighting. These light mounts are recessed, fully protecting the LED light fixtures from rocks and trail hazards.

Integrated Hitch Receiver
The integrated hitch receiver accepts standard 2" hitches and recovery accessories. It is built in to the structure of the Brawler FULL Width Rear Bumper in order to provide a higher clearance, tougher hitch that's there when you need it, but tucked up higher out of the way for better clearance and departure angles on the trail. Includes integrated safety chain loops. IMPORTANT: The integrated hitch receiver is not rated for towing. It is intended as a recovery attachment point only.

Rock Solid Mounting
The JK Brawler FULL Width Rear Bumper incorporates an extra set of mounting bolts, along the bottom of the bumper which fasten into the rear crossmember. Combined with the mounting flange bolts at either side, the bumper is rigidly fastened by a total of 8 Grade 8 bolts, on three different planes to provide ultimate strength and rigidity to the mounted bumper. The drivers side "floating" flange allows for safe, secure tightening to the Jeep's frame rails regardless of manufacturing variances from the Jeep factory.

Recovery Shackle Tabs
The Heavy Duty Recovery Shackle Tabs are CNC machined from 1" thick steel billet, specifically designed to accept our Heavy Duty 3/4" Recovery Shackles. These tabs are designed to match the high clearance aspects of the rest of the bumper and minimized hang-ups. These Heavy Duty Recovery Shackle Tabs come as standard equipment on the Brawler FULL Width Rear Bumper.

Optional Hi-Lift Jack Mount
A custom Hi-Lift Jack Mount (p/n 45-61-011), available separately, is CNC laster cut and bolts to the top of the tire carrier. It features a distinctive web design to match the corner gusset detail on the RockBrawler™ II Tire Carrier, and mounts the Hi-Lift jack above and forward of the spare tire to keep it tucked up and away until needed.

Image Galleries

Here is our entire collection of images for this product. We're constantly adding more photos so check back often if you don't see a shot with a specific angle or installation you are looking for. Do you own this item already? We'd love to have your photos to add to our collection. Just send the hi-res images via email to [email protected].

Features & Benefits

At Poison Spyder we strive to build superior features into every aspect of each product we make. Every feature has a reason for being included in the design. Here are a list of the most important of these features, along with an explanation of the benefits of each. Consider these important factors when shopping for products, and compare the competition to Poison Spyder's features and benefits!

Feature	Benefit
"Full" Width	Provides corner protection all the way to the edges of the fender flare. Visually integrates with the stock fender flares.
3/16" Plate Steel Construction	Lighter than bumpers constructed of 1/4" plate, but faceted design and internal gussets yield superior strength.
CNC Laser Cut & Brake Formed	Precision fit with consistent quality from unit to unit. Cleaner edges than plasma or flame-cut components.
Laser Cut Lightening Holes	Wherever possible without compromising strength, we've laser cut material out of the bumper to lighten it up. The result is that the Brawler FULL Width Rear Bumper is the same weight as our narrower RockBrawler II Rear Bumper.
Multi-Faceted Design	The best possible ground clearance and approach angles available without cutting Jeep's frame. Multiple bends also provide greater structural strength than flat, un-bent plate.
Single-Action opening tire carrier	Quick, easy, one-handed access to the cargo area since the tire carrier opens in tandem with the tailgate.
Fabricated plate steel tire carrier swing	Fabricated plate steel allows more freedom of design than simple tubular tire carriers, to better integrate features and design strength into the structure where needed.
Double Tapered Roller Bearing Spindle	The strongest hinge/pivot mechanism of any swing-out tire carrier on the market. Precision machined spindle and housing, plus servicable roller bearings provide years of trouble-free operation.
3-Way Adjustable Tire Mount	Allows for optimal tire mount placement regardless of tire size. Place it as low as possible to keep center of gravity low and rear visibility high. Adjust it close to the carrier to tighten it up to reduce rattles and stress on components. Multiple lug stud configurations to fit almost any wheel bolt pattern commonly used in the 4X4 scene.
High Clearance Recovery Shackle Tabs	Angled for improved obstacle clearance and approach angle. Designed to conform to the angles of the bumper to reduce hang-ups when approaching steep obstacles. CNC machined from 1" plate steel for ultimate strength.
Grade 8 Mounting Bolts on Multiple Planes	Easy bolt-on installation with Grade-8 fasteners on several plans (along the frame rail sides and below the crossmember) for superior mounting strenth.
Recessed LED Pod Light Mounts	Protected mounting for high intensity rear-ward aimed lighting.

Frequently Asked Questions

Got a question about this product? We've tried to cover the most frequently asked ones below. You may also want to check our Master FAQ Page for more general questions about Poison Spyder, our products, ordering and shipping. Don't see an answer to your question? Ask our sales department by email at [email protected], and we'll get back to you as soon as possible with the information you need.

Q: Can I buy the bumper now and add the tire carrier later?

A: Unfortunately we can not sell the tire carrier separately for retrofitting to existing rear bumpers. Welding in the tire carrier spindle is a highly precise operation, which can only be done properly with our specially designed assembly fixtures. For those who have already purchased a Poison Spyder bumper without a tire carrier, you may be interested in adding our JK Body Mounted Tire Carrier, which mounts independent of the bumper.

Q: Can I order it powder coated?

A: At this time we are not offering powder coat for this product. If we are able to devise suitable packaging which will adequately protect the powder coat finish during transit, we may add a powder coat option in the future.