Your Account:
(Your shopping cart is empty)
SEARCH:
Pick Your Poison!
Shop by Jeep Model!
Shop by Project!

Call Poison Spyder:

951-849-5911

Monday-Friday

8 AM to 5 PM Pacific

Email Poison Spyder:

sales@poisonspyder.com

JOIN OUR EMAIL LIST!






  Home > Bumpers & Stingers > BFH™ Front Bumpers >

JK BFH Front Bumper - Trail Stinger
JK BFH Front Bumper - Trail Stinger

Scroll down for additional photos below product description.




 
MSRP: $412.50
Spyder Direct: $394.00
You save $18.50!

PN: 17-16-020-S
Qty:

 
Poison Spyder Customs BFH™ front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH™ bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH™ bumper features an integrated winch mount and one-piece design. This product ships as bare steel—it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.

Customize your BFH™ bumper with several different Stinger/Bar options, Winch Fairlead Mount, and Heavy Duty Shackle Tabs:

The optional Brawler Bar is a lower-profile Stinger, fashioned after the 2-bend Stinger featured on our Original RockBrawler bumper for JK. The Brawler Bar features the most versatile combination of trail protection and a lower profile for easier access to the engine compartment, fitment into garages and trailers, etc. Plus it looks bad-ass! The Brawler Bar extends 7.4" forward from the front edge of the bumper, and 9.8" high from the top surface of the bumper.

The optional Trail Stinger™ is similar in proportion to the famous Poison Spyder Trail Stinger™. This time-honored design has proven itself on hundreds of Jeeps over the past decade, providing simple, clean lines along with a measure of forward-flop protection. The Trail Stinger™ extends 13.4" forward from the front edge of the bumper, and 17" high from the top surface of the bumper.

The optional Comp Stinger™ for the BFH™ front bumper matches the lines of our stand-alone Comp Stinger™s. For those getting into the more hard-core aspects of the sport, the Comp Stinger™ provides even better forward-roll prevention, as well as increased protection of the radiator area and engine compartment in the event of a rollover. The Comp Stinger™ extends 17.6" forward from the front edge of the bumper, and 21.9" high from the top surface of the bumper.

The optional Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH™ bumper to result in zero loss in approach angle.

The optional Winch Fairlead Mount is a separate piece (bolt-on, not weld-on) that mounts between your winch and the BFH™ bumper to provide a secure mounting surface for the winch fairlead (find it in the "Related Items" section below).

The JK BFH Disco Skid is an optional bolt-on skid plate to protect the factory electric swaybar disconnect motor on JK's. In stock form this motor hangs low, making it vulnerable to rocks and trail hazards. The BFH Disco Skid protects it, but also comes with hardware and instructions to rotate the motor upward, further out of harm's way. Like the BFH bumper, the Disco Skid is made of CNC laser-cut 3/16" plate steel and is designed to be a great looking, functional addition to the JK BFH bumper.

Whether you keep it simple or customize it with all the options, the BFH™ front bumper is a serious bumper for hardcore wheeling!


You may also like...
Aluminum Hawse Winch Fairlead Hawse Fairlead Light Mount Roller Fairlead Light Mount Winch Fairlead Mount
Spyder Direct: 58.00

Add
Spyder Direct: 37.00

Add
Spyder Direct: 31.00

Add
Spyder Direct: 58.00

Add
Aluminum Hawse Winch Fairlead Hawse Fairlead Light Mount Roller Fairlead Light Mount Winch Fairlead Mount
JK BFH Disco Skid '07-'11 3/4" Recovery Shackle
Spyder Direct: 111.00

Add
Spyder Direct: 16.00

Add
JK BFH Disco Skid '07-'11 3/4" Recovery Shackle

Average Customer Review: 5 of 5 Total Reviews: 5 Write a review.

  0 of 0 people found the following review helpful:
 
Simple Elegance!! January 29, 2015
Reviewer: Matthew M. from APO, AE United States  
VERY stout! Beautiful welds and everything I had expected it to be.  If you're affriad to cut into your rig, DONT BE.  Step by step instructions with pics, followed to the "T" and you will be fine.

(Side note) I have a 2012 JK (Sahara) and the fitment was very tight.  Had to grind down the sides of the frame rails a little as well as shimmy it over the top of the vacuum canister.  This was a tight squeeze against the top of the canister due to the rear gusset facing downward for the JK models.  This made the install a little annoying, but nothing that was not managable.  Overall, great job PSC and keep up the wonderful customer service!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Up front November 30, 2014
Reviewer: Lon Sr. Burling from Walbridge, OH United States  
More like a find art work then just a bumper, I found all my Poison Spyder parts to be out standing workmanship. Coated mine red, put a nice warn winch on it, and mounted it on white 2013 JKL. Everyone loves it. Now I've noticed when wheeling just how many other Jeepers are enjoying their own Poison Spyder stuff too!

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Product: JK BFH™ Front Bumper with Trail Sti May 4, 2012
Reviewer: erika huff from corpus christi, TX United States  
i really like my bfh wish yall would have sent a sticker to put on my rig but i guess the stinger says enough thanks look foward to adding more poison spider parts to my rig

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Amazing bumper!!! December 10, 2011
Reviewer: John Ledbetter from Hewitt, TX United States  
First thing first, If you don't want to cut on your JK then this is'nt the bumper for you.  If that doesnt bother you and you want a unbeatable approach angle get this bumper! It was simple to install with the directions be easy to follow. You wont be dissapointed buying this bumper!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
This thing is BEAST!!!! October 11, 2010
Reviewer: Michael Noel from Olathe, KS United States  
This thing is awesome! I was a little on the fence about chopping my frame to fit this bumper but the instalation is simple and straight forward. Best approach angle I've seen for the JK. The welds were so pretty it was a shame to paint over them! Thanks Poison Spyder for a great product!

Was this review helpful to you?


Browse for more products in the same category as this item:

Bumpers & Stingers > BFH™ Front Bumpers
Jeep JK • 2007-Current > JK Front Bumpers
Bumpers & Stingers
Jeep JK • 2007-Current
 

Poison Spyder Customs, Inc. is a Proud Member Of:

Poison Spyder urges our customers and ALL 4x4 enthusiasts to join the fight to keep our trails open, and maintain public access to public lands! Please join and support these organizations as well as your local clubs and land-use advocacy groups.

 About Us
 Contact Us
 Calendar
 Customer Service
 Find A Dealer
 Tech Library
 Send Us Feedback
 RallyVenture