SEARCH:
Pick Your Poison!
Shop by Jeep Model!
Shop by Project!

Call Poison Spyder:

1-800-776-0767

Monday-Friday

8 AM to 5 PM Pacific

Email Poison Spyder:

[email protected]





  Home > Lighting & Accessories > LED Headlights, Taillights & Markers >

JK LED Tail & Reverse Lights with Wiring Harnesses Kit
JK LED Tail & Reverse Lights with Wiring Harnesses Kit


 


PN: 41-08-010

 

This complete kit includes everything you need to install 4" round high intensity LED taillights and 2-1/2" round LED reverse lights into the Poison Spyder Crusher Corners on your Jeep JK Wrangler. AT A HUGE SAVINGS over purchasing these items separately! Poison Spyder's JK LED Taillight Harness system is the easy, plug-and-play answer to getting all of your Jeep Wrangler JK's rear LED lighting working quickly and correctly. It is designed to connect directly to your Jeep's OE wiring harness, and directly to LED taillights, back-up lights, and license plate lights sold by Poison Spyder. This kit includes:
• (1) JK LED Taillight Harness - Passenger Side (p/n 41-06-010-P)
• (1) JK LED Taillight Harness - Driver Side (p/n 41-06-010-D)
• (1) 4in LED Back-Up Light Extension Harness (Pair) (p/n 41-06-030)
• (2) 4” 24-LED Taillight Push-In with Pigtail & Grommet - Red (p/n 41-04-050)
• (2) 2-1/2” LED Back-Up Light - Clear (p/n 41-04-300)

The Spyder-Direct price of these items when sold separately is $309.10. Purchased in this kit for just $199.00, YOU SAVE $110!

Product Description

Check out this Tech Series video to see how its installed!
Exclusive "Plug-N-Play" Design
Poison Spyder's wiring harness system is designed to take all of the guesswork, hassle and labor out of wiring aftermarket LED taillights, back-up lights and license plate/third brake lights on your 2007 and later Jeep Wrangler JK. The two main harness components, to which the other components connect in order to accommodate your Jeep's customized rear lighting setup. The JK LED Taillight Harness - Driver Side is typically used on the driver's side and does not include provisions for the license plate light. The JK LED Taillight Harness - Passenger Side is typically used on the passenger side, and includes a 6-foot lead and weatherproof connector for our LED License Plate & 3rd Brake Light - PSC Connectors. You will need two of these JK LED Taillight Harnesses, typically one of each type, for most configurations. Each of these Taillight Harnesses plug right into your Jeep's factory wiring harness—simply unplug the stock taillight pigtail and plug the Poison Spyder taillight harness in its place. OEM quality connectors provide a positive, weather-tight connection just like the factory wiring. Weatherproof connectors are used for all other connections as well as automotive quality wires and split-loom protective sheathing. Once the Poison Spyder taillight harnesses are in place, several LED lighting products may be plugged directly into the harness or connected via jumper harnesses.

Supports 4" Round LED Taillights
Both driver and passenger side Poison Spyder taillight harnesses include the correct 3-prong connector to plug directly into the 4" Round, 24-diode LED Stop/Turn/Tail Lights sold by Poison Spyder. Each taillight harness also incorporates a load resistor to simulate the correct power load so turn signals will flash at the correct speed and to keep the vehicle's computer from throwing an error code. No longer must these load resistors be wired in separately with wire taps and butt connectors. NOTE: The LED taillight connector is designed to work with the 4" round LED Taillights sold by Poison Spyder only. It is not guaranteed to fit any other brand or model of taillight.

Supports 2-1/2" Round LED Back-Up Lamps
Both driver and passenger side Poison Spyder taillight harnesses include TWO weather-tight connectors for connecting up to two 2-1/2" Round LED Back-Up Lamps per side, for a total of four such lamps. Typical configurations using Poison Spyder JK Crusher Corners and/or bumpers may include such Back-Up Lamps directly below each LED taillight, in the recessed Back-Up Lamp buckets found on many of our rear bumpers, or both. To connect to Back-Up Lamps located directly below the LED taillights on Poison Spyder JK Crusher Corners, simply use the 4" Back-Up Light Extension Harness on each side. To connect to Back-Up Lamps located in the recessed mounts on many Poison Spyder JK Rear Bumpers, use the 24" Back-Up Light Extension Harness (NOTE: Not included in this kit, must be purchased separately) on each side. Remember, there are two Back-Up Lamp connectors on each taillight harness, in order to accomodate both a 4" and a 24" Back-Up Light Extension Harness on each side simultaneously. Both of these connectors are wired into the vehicle's back-up lamp circuit. If you wish to divert one pair of these lamps to use as manually switched load or work lights, you'll have to research and make the necessary alterations to the harness and the vehicle's wiring on your own. NOTE: The LED Back-Up Lamp Extension Harnesses are designed to work with the 2-1/2" Round LED Back-Up Lamps sold by Poison Spyder only. They are not guaranteed to fit any other brand or model of lamp.

Supports LED License Plate & Third Brake Light
(NOTE: Not included in this kit, must be purchased separately) The passenger side Poison Spyder taillight harness includes a 6-foot lead with weather-tight connector to connect to our LED License Plate & 3rd Brake Light - PSC Connectors. On most Jeep JK's on which Poison Spyder Crusher Corners and LED taillights have been installed, the license plate has been relocated from the stock position on the driver's side corner. In most cases it has been relocated either to the spare tire carrier or to the center of the tailgate on those Jeeps where the spare tire has been removed altogether. In either case, the 6-foot lead on the passenger side LED taillight harness can be routed either through the tailgate or along the tire carrier, and plugged into the LED License Plate & Third Brake Light at the relocated license plate. On those Jeeps where no license plate light is needed or it has already been addressed elsewhere, the lead for the license plate light can be simply coiled up and secured inside the Jeep body's corner cavity, secured with some zip-ties.. NOTE: The license plate lead is designed to work with the LED License Plate & 3rd Brake Light - PSC Connectors sold by Poison Spyder only. It is not guaranteed to fit any other brand or model of license plate light or third brake light.

Image Galleries

Here is our entire collection of images for this product. We're constantly adding more photos so check back often if you don't see a shot with a specific angle or installation you are looking for. Do you own this item already? We'd love to have your photos to add to our collection. Just send the hi-res images via email to [email protected].


You may also like...
JK 4-Dr Crusher Corners - LED Tail & Backup Lights LED License Plate & 3rd Brake Light - PSC Connectors 2-1/2" LED Back-Up Light - Clear 24in LED Back-Up Light Extension Harness (Pair)

Add

Add

Add

Add
JK 4-Dr Crusher Corners - LED Tail & Backup Lights LED License Plate & 3rd Brake Light - PSC Connectors 2-1/2" LED Back-Up Light - Clear 24in LED Back-Up Lamp Extension Harness (Pair)

Average Customer Review: Average Customer Review: 4.5 of 5 4.5 of 5 Total Reviews: 3 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 Easy to Install June 27, 2019
Reviewer: Jason T. from Bakersfield, CA United States  
I bought this kit for my crusher corners. This kit made the wiring a breeze.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 A+ May 14, 2016
Reviewer: daniel boone from Fort Worth, TX United States  
A+

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 worked well September 3, 2015
Reviewer: David Hamilton from Kennewick, WA United States  
took watching the video to understand which harnesses were needed where and for what purpose.  

A schematic that illustrates all of the needed harnesses for the various options would be very helpful in ordering.  I ended up needed a pair of 24 inch harnesses to connect back lights in my bumper.  i thought that these came with the Wiring kit.

Was this review helpful to you?


Browse for more products in the same category as this item:

Lighting & Accessories > LED Headlights, Taillights & Markers
Rear Corner Armor > JK Crusher Corners™
Jeep JK • 2007-2018 > JK Rear Corner Armor
Lighting & Accessories
Jeep JK • 2007-2018
Jeep JK • 2007-2018 > JK Exterior Upgrades
Rear Corner Armor
 

Poison Spyder Customs, Inc. is a Proud Member Of:

Poison Spyder urges our customers and ALL 4x4 enthusiasts to join the fight to keep our trails open, and maintain public access to public lands! Please join and support these organizations as well as your local clubs and land-use advocacy groups.

 About Us
 Contact Us
 Privacy Policy
 Customer Service
 Find A Dealer
 Tech Library
 Send Us Feedback
 RallyVenture
 
Reviewed by Accessible360