SEARCH:
Pick Your Poison!
Shop by Jeep Model!
Shop by Project!

Call Poison Spyder:

1-800-776-0767

Monday-Friday

8 AM to 5 PM Pacific

Email Poison Spyder:

[email protected]





  Home > Suspension & Drivetrain > Bombshell™ Diff Covers >

Bombshell Diff Cover - Dana 44 - Bare
Bombshell Diff Cover - Dana 44 - Bare

Scroll down for additional photos below product description.




 


PN: 42-11-044

 

Bombshell™ Poison Spyder Bombshell™ Diff Covers are designed to protect your gears, lockers and diff cover bolts from the most punishing rocks and trail hazards. The stock covers your Jeep came with are weak, stamped sheetmetal. Even a moderate tap with a rock can cave it in against your ring gear, causing potential damage to the gears, locker and carrier bearings, not to mention a difficult, messy trail fix. Even more common, though less catastrophic, is "peel back" that can occur when sliding over a rock causes the lip of the cover to peel up, allowing your gear oil to drain causing a hazard for both your Jeep and the environment. The Bombshell™ Diff Cover is your best insurance against each of these hazards.

JUMP TO:
Top of Page | Product Description | Image Galleries | Features & Benefits | Frequently Asked Questions | Related Products

Product Description

The Dana 44 Bombshell can now be used on STOCK Jeep Wrangler JK and TJ, front or rear axles, with no requirement for aftermarket track bars or suspension modifications! Now you can install the Bombshell Dana 44 Diff Cover on to your bone stock Jeep, straight off the showroom floor! This re-design also includes moving the gear oil fill hole to the stock fluid level height so there's no more research, guesswork or measuring—simply fill the diff to the level of the fill hole.

The Dana 44 Bombshell™ differential cover is cast from highly ductile nodular iron—the same material drag racing differential housings are cast from to handle thousands of horsepower. The design of the Bombshell™ incorporates recesses to protect the diff cover bolt heads from trail damage, while the profile of the Bombshell™ acts as a ramp to help slide your Jeep up and over the most troublesome pumpkin-eaters. The ramp profile also results in an extremely thick& up to 1" thick—cross-section around the bolt ring, where contact with the rocks is most likely. Throughout the rest of its cross-section the Bombshell™ is the thickest cast differential cover on the market, from 7/16" to a brutal 1/2" thick at the outermost surface.

Installing the Bombshell™ is fast and easy. Click the icon at left to view our Install Instructions, and view the video on the right to see the installation process. The sealing surface has been CNC machined flat for a perfect seal. Poison Spyder provides a tube of silicon sealant and new Grade 8 hardware so you'll have everything you need except for tools and gear oil.

Bombshells are shipped either bare so that you may powder coat or paint to suit your own preference, or powder coated semi-gloss black. NOTE: many of the photos below show where the customer has painted the raised area of the Spyder logo a contrasting color. This is NOT done by Poison Spyder—our powder coat option is just a single color (all black).

JUMP TO:
Top of Page | Product Description | Image Galleries | Features & Benefits | Frequently Asked Questions | Related Products

Image Galleries

Here is our entire collection of images for this product. NOTE: Some images depict earlier versions of this product. We're constantly adding more photos so check back often if you don't see a shot with a specific angle or installation you are looking for. Do you own this item already? We'd love to have your photos to add to our collection. Just send the hi-res images via email to [email protected].

JUMP TO:
Top of Page | Product Description | Image Galleries | Features & Benefits | Frequently Asked Questions | Related Products

Features & Benefits

At Poison Spyder we strive to build superior features into every aspect of each product we make. Every feature has a reason for being included in the design. Here are a list of the most important of these features, along with an explanation of the benefits of each. Consider these important factors when shopping for products, and compare the competition to Poison Spyder's features and benefits!

Feature Benefit
Now Fits Stock Applications This version of the Bombshell Diff Cover has been re-designed to fit all applications including stock Jeep Wrangler JK's and TJ's without aftermarket suspension components.
High Ductile Nodular Iron This is the same material high stress items like drag racing rear end cases are made of—the famous Ford 9" N cases are nodular iron. High ductility means that this material is less likely to break on impacts compared to more brittle materials such as normal cast iron.
Ramp Profile The profile of the Bombshell™ slants continuously toward the outside edge of the bolt ring, in effect forming a "ramp" that helps the vehicle slide up and over rocks rather than snagging on them. Some competing diff covers curve inward to the inside edge of the bolt ring, creating a step or ledge around the outside edge of the cover that can more easily snag on rocks, impeding forward progress. The ramp profile also results in an extremely thick outer edge, around the bolt ring. At up to 1" thick, this extra material is absolute protection agains "peel back"
Peel Back Protection The ramp profile of the Bombshell™ also results in an extremely thick outer edge, around the bolt ring. At up to 1" thick, this extra material is absolute protection agains "peel back"—the condition that can happen when sliding over a rock in the reverse direction (or forward, in the case of the rear diff), when the rock wants to grab the lip of the cover and peel it back, draining your oil and leaving your gears high and dry.
Extra Thick Throughout The Bombshell™ cover is the thickest cast differential cover on the market, ranging from 7/16" thick to over 1/2" thick (not counting the bolt ring area, which goes much thicker). This thickness is your best protection against the rocks caving it in and damaging your internal differential components.
CNC Machined Mount Surface The mounting surface of the Bombshell™ has been CNC machined flat for a positive seal, even without using a gasket! An effective, leak-free installation may be made using just the provided silicon sealant.
Fill Hole at Stock Level Previous versions of the Bombshell Diff Cover had the fill hole located higher on the cover to allow for intentional over-filling at the owner's discretion, or to accomodate for rotated axle housings. This resulted in confusion over the proper amount of fluid to use. With this version of the Bombshell Diff Cover, the fill hole has been moved to the level of the fill hole on stock covers so that it may act as the fill level indicator. No more research or measuring—simply fill the gear case to the level of the fill hole regardless of locker/carrier.
Raised Spyder Design The raised Spyder design on the Bombshell™ Diff Cover identifies it as a Poison Spyder product, with the top notch quality and backing that comes along with it. But its more than just a cosmetic feature—the raised portions of the Spyder logo push the thickness of the Bombshell™ up to an outrageous 1/2" thick! The Spyder also provides many opportunities for customizing, as owners can choose to paint the Spyder body color—or any other contrasting color—or black it out and highlight the rest of the cover.
Complete Kit The Poison Spyder Bombshell™ comes as a complete kit, with everything you need to install it except for tools and gear oil. Quality Grade 8 bolts and washers are provided, as well as high grade silicon sealant. The machined mounting surface of the Bombshell™ allows for a gasket-less install using just sealant.

JUMP TO:
Top of Page | Product Description | Image Galleries | Features & Benefits | Frequently Asked Questions | Related Products

Frequently Asked Questions

Got a question about this product? We've tried to cover the most frequently asked ones below. You may also want to check our Master FAQ Page for more general questions about Poison Spyder, our products, ordering and shipping. Don't see an answer to your question? Ask our sales department by email at [email protected], and we'll get back to you as soon as possible with the information you need.

Q: Can the Dana 44 Bombshell be used on a STOCK Jeep Wrangler?

A: This is a newly re-designed version of the Bombshell that is designed to fit all Jeep Wrangler applications, even those without suspension modifications. In other words, it will fit on a bone stock Jeep Wrangler right off the showroom floor. Earlier versions of the Dana 44 Bombshell did require an aftermarket Track Bar to ensure there would be no contact on full compression.

Q: How much gear oil should I use?

A: This version of the Dana 44 Bombshell has the fill hole located at the proper fluid level. Simply fill it to the level of the fill hole for the correct quantity of lubricant. This quantity will vary slightly depending on the amount of oil displaced by different types of lockers/carriers, but filling to the level of the fill hole always result in the proper amount.

Q: What brand or weight of gear oil should I use?

A: Different differentials and lockers require different grades of oil. We will defer to your vehicle or locker manufacturer's reccomendation of what oil to use. Consult your owners manuals or call the manufacturer.

Q: Do I need to use a differential cover gasket?

A: With the machined mating surface of the Bombshell™ , the use of a gasket is optional. It will seal properly with only a bead of silicone sealant, if correctly applied. That's why we include a tube of sealant, making this a complete kit. Alternatively you may use a gasket if you prefer.

Q: Will the Bombshell™ work with my aftermarket suspension system?

A: Poison Spyder Bombshell™ Diff Covers are not compatible with some aftermarket suspension systems whose track bar mounts or other components attach to the diff cover bolts, such as those manufactured by Skyjacker and Full Traction. The recessed bolt head design of the Bombshell™ interferes with these systems.

JUMP TO:
Top of Page | Product Description | Image Galleries | Features & Benefits | Frequently Asked Questions | Related Products

Related Products

Don't forget any of these related items you might be interested in...


Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 12 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 February 11, 2018
Reviewer: Stefano Predieri from Carpi, Carpi Italy  


Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 Great Buy! January 9, 2018
Reviewer: Devin Bruce from Saint George, UT United States  
Purchased some Poison Spyder Vented inner Fenders awhile back, they were good quality and looked really good so I decided to try the Dif covers too. They are super high quality build, nothing about them is cheap. They look cool and meet my standards and exceed other companies standards. Highly recommend!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great product! December 31, 2016
Reviewer: Mark Hastings from Palm Springs, CA United States  
The Bombshell Diff covers are better than stock. I had them powder coated black with the spider red… Very nice look!  Thanks.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Poison Spyder Bombshell October 8, 2016
Reviewer: Allen Bowling from South Fulton, TN United States  
Awesome design very well made and looks great painted and on my 78 CJ5

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Bad a** parts May 11, 2016
Reviewer: levi foster from pittsburg, CA United States  
Diff cover looks good under my jeep as well as my front bumper I bought from you guys also thanks for making awesome parts

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

Suspension & Drivetrain > Bombshell™ Diff Covers
Jeep JK • 2007-2018 > JK Suspension & Drivetrain
Jeep TJ - LJ • 1997-2006 > TJ/LJ Suspension & Drivetrain
Jeep YJ • 1987-1995 > YJ Suspension & Drivetrain
Jeep CJ • 1976-1986 > CJ Suspension & Drivetrain
Universal 4X4 > Bombshell™ Diff Covers
Suspension & Drivetrain
Jeep JK • 2007-2018
Jeep TJ - LJ • 1997-2006
Jeep YJ • 1987-1995
Jeep CJ • 1976-1986
Universal 4X4
Gifts Under $125
 

Poison Spyder Customs, Inc. is a Proud Member Of:

Poison Spyder urges our customers and ALL 4x4 enthusiasts to join the fight to keep our trails open, and maintain public access to public lands! Please join and support these organizations as well as your local clubs and land-use advocacy groups.

 About Us
 Contact Us
 Privacy Policy
 Customer Service
 Find A Dealer
 Tech Library
 Send Us Feedback
 RallyVenture
 
Reviewed by Accessible360