SEARCH:
Pick Your Poison!
Shop by Jeep Model!
Shop by Project!

Call Poison Spyder:

1-800-776-0767

Monday-Friday

8 AM to 5 PM Pacific

Email Poison Spyder:

[email protected]





  Home > Jeep TJ - LJ • 1997-2006 >

TJ BFH II Rear Bumper
TJ BFH II Rear Bumper

Scroll down for additional photos below product description.




 


PN: 14-61-030

 
BFH II Rear Bumper

The Poison Spyder Customs BFH™ II rear bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" designed with light weight, toughness and performance in mind. It is basically a "frame cap" style bumper, hugging the rear end of the Jeep's frame and crossmember to provide the best obstacle clearance and departure angle possible. But unlike other frame cap bumpers that are on the market, the BFH™ II incorporates signature Poison Spyder style, with multiple angles and facets to give the bumper great looks on top of its hard core funcionality.

JUMP TO:
Top of Page | Product Description | Image Galleries | Features & Benefits | Frequently Asked Questions | Related Products

Product Description

The BFH™ II is CNC laser-cut from high strength 3/16" plate steel, then precision brake-formed for an exact fit over the Jeep's rear frame and crossmember. The heavy duty recovery shackles are CNC machined from 1" thick plate steel, and welded both inside and outside the bumper shell. The tabs are standard equipment on the BFH™ II, and are designed to accept 3/4" recovery shackles (AKA "D-Rings"). This bumper is available in bare steel only—it will need to be painted or powder coated prior to final installation.

The BFH™ II Rear Bumper is easily installed using captured grade-8 hardware and the Jeep's existing bumper mounting holes. For added strength, we recommend adding Poison Spyder's TJ Rear Bumper Brace Kit, especially if the bumper's recovery points will be used. The BFH™ II Rear Bumper has no provisions for a spare tire carrier. This bumper is intended for those hard-core wheelers who either wheel without a spare or strap the spare down into the bed of the Jeep. For DIY'ers, it is possible to use this bumper as the base for our DIY Rear Stinger Tire Carrier (requires welding). In some cases, this bumper may be compatible with the OE tailgate-mounted spare tire carrier, depending on the size of the spare tire.

This product ships as bare steel—it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.

JUMP TO:
Top of Page | Product Description | Image Galleries | Features & Benefits | Frequently Asked Questions | Related Products

Image Galleries

Here is our entire collection of images for this product. We're constantly adding more photos so check back often if you don't see a shot with a specific angle or installation you are looking for. Do you own this item already? We'd love to have your photos to add to our collection. Just send the hi-res images via email to [email protected].

JUMP TO:
Top of Page | Product Description | Image Galleries | Features & Benefits | Frequently Asked Questions | Related Products

Features & Benefits

At Poison Spyder we strive to build superior features into every aspect of each product we make. Every feature has a reason for being included in the design. Here are a list of the most important of these features, along with an explanation of the benefits of each. Consider these important factors when shopping for products, and compare the competition to Poison Spyder's features and benefits!

FeatureBenefit
3/16" Plate Steel ConstructionThe BFH™ II Rear Bumper is fabricated entirely of CNC laser-cut, precision brake-formed 3/16" plate steel to provide the strength to withstand punishment on the trail.
"Faceted" DesignThe BFH™ II has Poison Spyder's signature great looks and multiple-facet design.
Extreme ClearanceThe BFH™ II Rear Bumper fits snugly around the rear frame and crossmember of the Jeep, allowing the most clearance and best departure angle possible.

JUMP TO:
Top of Page | Product Description | Image Galleries | Features & Benefits | Frequently Asked Questions | Related Products

Frequently Asked Questions

Got a question about this product? We've tried to cover the most frequently asked ones below. You may also want to check our Master FAQ Page for more general questions about Poison Spyder, our products, ordering and shipping. Don't see an answer to your question? Ask our sales department by email at [email protected], and we'll get back to you as soon as possible with the information you need.

Q: Can I order it powder coated?

A: At this time we are not offering powder coat for this product. If we are able to devise suitable packaging which will adequately protect the powder coat finish during transit, we may add a powder coat option in the future.

Q: Can I get it with an integrated tow hitch?

A: No. The BFH™ II Rear Bumper literally hugs the rear frame and crossmember of the Jeep. There is simply no room to integrate a tow hitch into this bumper. However, some OE or aftermarket tow hitches may be compatible, as they would bolt on below the bumper itself.

Q: Can I use this bumper as the base plate for a rear stinger tire carrier?

A: Yes, however it will require some DIY work on your part. You would need to purchase our DIY Rear Stinger Tire Carrier Kit separately, then weld the pivot bushing tabs on to the bumper.

JUMP TO:
Top of Page | Product Description | Image Galleries | Features & Benefits | Frequently Asked Questions | Related Products

Related Products

Don't forget any of these related items you might be interested in...


You may also like...
3/4" Recovery Shackle TJ Rear Bumper Brace Kit

Add

Add
3/4" Recovery Shackle Jeep TJ Rear Bumper Brace Kit

Average Customer Review: Average Customer Review: 4.5 of 5 4.5 of 5 Total Reviews: 5 Write a review.

  0 of 0 people found the following review helpful:
 
4 of 5 Nice product but not for Comp Cut December 19, 2018
Reviewer: Daniel Butler from West Jordan, UT United States  
So this bumper doesn't actually work for the Comp cut rear quarters like it says in the description. I even called and made sure it was specifically for the comp cut. I mean obviously a full width bumper isn't going to work back there.
Well, it didn't fit. Sticks out about 12" on each side past the fenders...
I called again, talked with Alex and though I could have returned it (leaving me without a bumper) I didn't, cut 10" out of the middle and welded it back together. All good now.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
3 of 5 Great bumper- Communication w/PS poor April 4, 2016
Reviewer: FLDTYjeepGRL from St. Louis, Missouri  
I love my new rear bumper! Had it powder coated and looks great on the Jeep. As far as the ordering/shipping communication process...I received an email thanking me for my purchase and gave me an order number. It also stated that I would get a shipping notice along with tracking information. After a week of not receiving any sort of shipping notice, I called PS. When I spoke to someone they said they were "delayed" getting out the notices, took 10 minutes to find/verify my order and was informed my shipment should be arriving Thursday, possibly. I still never receive any notice, even after I called. Of course, my bumpers were not delivered on "Thursday" and instead arrived while I wasn't home and had no notification they were delivered. I came home after work, in the dark to over $600 worth of bumpers on my front porch. Again, great product which is why my review is average instead of poor due to lack of promised communication, otherwise excellent.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 BFH Rear Bumper June 13, 2015
Reviewer: Ron Kleve from Portland, OR United States  
Very impressed with the bumper as I unpacked it from the box! Having been a designer, I know what it takes to fabricate a part like this and you've done a great job! The folks that did the powder coat were impressed as well. Wish I had done a different color though, the gloss black hides a lot of the contours that I would have liked to show. Aesthetics aside, the bumper fits nicely once I figured out the gas tank skid plate.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Perfect February 21, 2014
Reviewer: Geoffry Hollopeter from Fishers, IN United States  
The cleanest TJ bumper on the market. Can't go wrong with PS! Install was a breeze. Thanks!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 This bumper is awesome November 2, 2013
Reviewer: William Cover from Austin, TX United States  
It is built solid and looks fantastic on my jeep. The welds are incredible and the fit of the bumper is great.

Was this review helpful to you?


Browse for more products in the same category as this item:

Jeep TJ - LJ • 1997-2006
Bumpers & Stingers > BFH™ Rear Bumpers
Bumpers & Stingers
Jeep TJ - LJ • 1997-2006 > TJ/LJ Bumpers & Stingers
 

Poison Spyder Customs, Inc. is a Proud Member Of:

Poison Spyder urges our customers and ALL 4x4 enthusiasts to join the fight to keep our trails open, and maintain public access to public lands! Please join and support these organizations as well as your local clubs and land-use advocacy groups.

 About Us
 Contact Us
 Privacy Policy
 Customer Service
 Find A Dealer
 Tech Library
 Send Us Feedback
 RallyVenture
 
Reviewed by Accessible360