SEARCH:
Pick Your Poison!
Shop by Jeep Model!
Shop by Project!

Call Poison Spyder:

1-800-776-0767

Monday-Friday

8 AM to 5 PM Pacific

Email Poison Spyder:

[email protected]





  Home > Exterior Upgrades >

JK Hood Louver '13+ - Bare
JK Hood Louver '13+ - Bare

Scroll down for additional photos below product description.




 


PN: 17-53-011

 

Many of the problems Jeeps and slow-moving rockcrawlers encounter on the trail are due to overheating. At slow speeds there simply isn't enough airflow through the engine compartment to keep things cool. Worse, engine compartments on most vehicles are poorly vented, with no way for hot air (which rises) to escape from the upper areas of the engine bay. Poison Spyder's Hood Louvers solve that problem by promoting proper airflow through and out of the engine compartment, while adding great looks to your Jeep.

NOTE: This item fits JK's with two windshield washer nozzles, which should be 2013 and later models (please physically check yours before ordering, as there may be some discrepency between this feature change and the model year change). A version designed to fit the 2007-2012 models, with a single windshield washer nozzle, is available HERE.

JUMP TO:
Top of Page | Product Description | Image Galleries | Features & Benefits | Frequently Asked Questions | Competitive Comparisons | Related Products

Product Description

Cool That Engine!
The Poison Spyder Hood Louver helps keep your engine running cool by promoting airflow through the engine compartment. Many factors can contribute to high under-hood temperatures, which can translate to higher engine coolant temperatures and overheating. Headers, slow speeds, flex fans, and the cramped spaces of the engine compartment can all contribute to increased heat and reduced airflow. This Hood Louver kit frees up airflow through the engine compartment, allowing hot air to escape and cooler air to be drawn in through the radiator, improving cooling of both the engine coolant and under-hood air. Rock-crawlers and slow-moving vehicles are especially susceptible, as slower speeds naturally result in reduced airflow.

Great Looks
In addition to improved cooling performance, Poison Spyder Hood Louvers add great looks to your Jeep! The Poison Spyder Hood Louver looks great on any Jeep, whether it is painted to match the body color or powder coated a contrasting color. For convenience, it is available either bare or powder coated black. Adding to the great looks are the stainless steel button head cap screws used to fasten the louver to the hood.

Good Value For the Price
A Poison Spyder Hood Louver is one of the best bang-for-your-buck improvements you can do for your Jeep. Compare it to the cost of a complete replacement hood with vents, such as those from AEV, and its easy to see what a great value the Poison Spyder product is.

Quality Construction
Poison Spyder Hood Louvers are crafted from quality, thick gauge aluminum sheet. They are CNC laser-cut and precision die-stamped. Packaging Hood LouversAluminum makes the hood louver both light weight and corrosion resistant. But its thick enough to add some rigidity to the Jeep's notoriously thin sheetmetal hood, helping to reduce "hood wobble" at speeds.

Easy Installation
Hood Louvers are fairly easy to install but do require some drilling and cutting of your hood. Stainless steel fasteners are supplied, as well as a full-size template with instructions for cutting the airflow holes in the hood. Because it is a one-piece design, specific for each model Jeep, installation is a quick and easy. Competitors' hood louver products may include multiple pieces that are painstaking to properly align and install, while others provide no cut template, leaving you to figure out how best to place the louver and cut the holes underneath.

Superior Packaging
We've put almost as much engineering into the packaging as we did for the louver itself! As a rather large, unwieldy piece, it is imperative that the Hood Louver be properly packaged to ensure against shipping damage. Our custom box and CAD designed foam blocking are your best insurance against the hassles of possible shipping damage.

JUMP TO:
Top of Page | Product Description | Image Galleries | Features & Benefits | Frequently Asked Questions | Competitive Comparisons | Related Products

Image Galleries

Here is our entire collection of images for this product. Note that most of these photos depict the 2007-2012 JK Hood Louver (single windshield washer nozzle). We're constantly adding more photos so check back often if you don't see a shot with a specific angle or installation you are looking for. Do you own this item already? We'd love to have your photos to add to our collection. Just send the hi-res images via email to [email protected].

IMPORTANT: Many of the installed photos in the gallery below show an earlier version of the Hood Louver, which featured the full Poison Spyder logo cut out at the top end. The current design features just the "Spyder" emblem by itself, without the Poison Spyder lettering. The logo was the only change.

JUMP TO:
Top of Page | Product Description | Image Galleries | Features & Benefits | Frequently Asked Questions | Competitive Comparisons | Related Products

Features & Benefits

At Poison Spyder we strive to build superior features into every aspect of each product we make. Every feature has a reason for being included in the design. Here are a list of the most important of these features, along with an explanation of the benefits of each. Consider these important factors when shopping for products, and compare the competition to Poison Spyder's features and benefits!

Feature Benefit
Louvers Allow hot air to escape the engine compartment, keeping under-hood temperatures cooler. Improved airflow out of the engine bay also helps improve airflow into the engine bay, including through the radiator, helping your radiator and fan operate more efficiently.
One-Piece Construction Easier to install than kits that consist of several separate pieces. Helps add rigidity to the flimsy stock sheetmetal of the hood, helping to reduce "hood wobble".
Heavy Gauge Aluminum Lightweight and corrosion resistant. Helps add rigidity to the flimsy stock sheetmetal of the hood, helping to reduce "hood wobble".
Separate Hardware Some competing products use a pressed-in threaded stud rather than the through-bolt hardware we use. The metal studs can be easily damaged in shipping, are prone to dislodging, and can be very difficult to lign up with bolt holes that may be slightly off due to drill wander. They are also made of normal steel rather than the great looking, corrosion resistant stainless steel fasteners we use.
Superior Packaging Poison Spyder's engineered, well-thought-out packaging for the Hood Louver ensures the product will arrive undamaged, with less chance of the hassle of filing shipping damage claims.

JUMP TO:
Top of Page | Product Description | Image Galleries | Features & Benefits | Frequently Asked Questions | Competitive Comparisons | Related Products

Frequently Asked Questions

Got a question about this product? We've tried to cover the most frequently asked ones below. Don't see an answer to your question? Ask our sales department by email at [email protected], and we'll get back to you as soon as possible with the information you need.

Q: Does the Hood Louver allow water to get into my engine compartment?

A: This is a very common question that we get asked all the time. The simple answer is yes, some water can trickle down through the louvers during wet weather, but this hasn't caused any significant problems for the hundreds of people who have installed our Hood Louvers. It is important to remember that the engine bay is not a sealed compartment—it is common and expected that water can splash up into there even with a stock, uncut hood. That's why all of the engine components and electrical connections under the hood are weatherproofed from the factory. Many Jeep owners routinely pop the hood and hose down the engine compartment anyhow, to clean off dust and mud after wheeling trips, with no ill effects. Even if you live in an area with wet weather, you can install the Poison Spyder Hood Louver with confidence.

Q: I keep stripping the small screws, what am I doing wrong?

A: Our Hood Louvers are installed using small, stainless steel button head cap screws. We've heard a few complaints from customers who have stripped out either the threads or the internal hex socket on these. Here are a few thoughts to keep in mind when using them. First, the alloy used in stainless steel fasteners is not as hard as a Grade 8 bolt, so more care must be taken when installing them. Always use anti-sieze compound on the threads, especially when installing products that require pre-installation, removal, then final installation, such as with the Hood Louver kit. The lock nuts used in these kits are zinc plated steel and of a harder alloy than the stainless steel cap screws, so the threads can gall more easily if they are cross-threaded or over-tightened. Also when using the hex key (Allen wrench), make sure the hex key is fully seated into the hext socket in the head of the screw, and not tilted at an angle. And ALWAYS use flat-ended hex keys with stainless steel fasters, never use ball-end hex keys with them. Also, try holding the head of the screw stationary with the hex key, while turning the nut with the wrench. This will make it easier to keep the tool straight and apply constant pressure while tightening. Finally, DO NOT OVER TIGHTEN.

JUMP TO:
Top of Page | Product Description | Image Galleries | Features & Benefits | Frequently Asked Questions | Competitive Comparisons | Related Products

Competitive Comparisons

It's a crowded market with a lot of manufacturers competing to earn your business. Here we've assembled a chart with a few of the key competing products in this product category, to assist with your shopping. We've tried to make sure this information is as accurate as possible, but if you spot an inaccuracy on this chart please let us know at [email protected].

MFG & Prod Name Base Price # Pieces Hardware Template Model Specific? Powder Coat
Poison Spyder $129.00 1-Piece Stainless Button Heads Yes Yes-JK, TJ, YJ OPT +$30
Hyline $180.00 (JK)
$155.00 (TJ/YJ)
2-piece (JK)
1-piece (TJ/YJ)
Pressed-in studs Yes Yes-JK, TJ, YJ OPT +$20
American Rock Rods $148.00 1-Piece Stainless Button Heads Info N/A Yes-JK, TJ, YJ OPT +$20
Poly/Synergy $125.00 1-Piece Stainless Button Heads No Yes-JK Only OPT +$20
A to Z Fabrication $195.00 1-Piece Info N/A Info N/A Yes-JK, TJ, YJ Not Offered
Gen-Right $130.00 5-Piece Not Included No Generic Included
Run Cool $129.00 2-Piece Pop rivets No Generic OPT +$20

JUMP TO:
Top of Page | Product Description | Image Galleries | Features & Benefits | Frequently Asked Questions | Competitive Comparisons | Related Products

Related Products

Don't forget any of these related items you might be interested in...


Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 12 Write a review.

  1 of 1 people found the following review helpful:
 
5 of 5 From shipping to install, its all good. January 23, 2016
Reviewer: Dwayne Ross from Brooksville, FL United States  
Super fast shipping! Received on Monday, powder coated on Tuesday, installed on Saturday. Cutting hood was a little nerve wracking on the first cut. Would recommend this for everyone.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 JK HOOD LOUVER '13+ BARE January 14, 2016
Reviewer: Grant Passalacqua from Windsor, ON Canada  
I purchased this item to be installed on my Jk. I'm in the process of getting powder coated to match the color theme for my jeep. However I'm excited to install it, but it'll have to wait till spring because the winters up here in Canada are pretty harsh! lol

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Good addition September 17, 2015
Reviewer: Greg H. from Moab, UT  
I'm sure that I, like everyone, is a little hesitant to start cutting into their pristine Jeep...... I added this louver because of excess temps when towing a camp trailer, albeit over the continental divide, so not a normal climb. The templates and instructions were spot on, easy to do with a 18v cut off wheel and grinder, care definitely is necessary not to cut into the underlying hood reinforcement. I just rattle canned my louver so I could get it mounted for a trip but powder coating is in it's future. Temps still climb a bit but I can see the heat escaping and it cools down much faster, an inexpensive and positive improvement!

Was this review helpful to you?

  0 of 1 people found the following review helpful:
 
5 of 5 JK Hood Louver May 22, 2015
Reviewer: Miguel Andrisani from Fullerton, CA United States  
Product looks great! cant wait to install it!

Was this review helpful to you?

  0 of 1 people found the following review helpful:
 
5 of 5 Hood louvers September 21, 2014
Reviewer: Don Devito from New castle, DE United States  
This was and easy project , the stencil was perfect , the step by step directions could steer you wrong, great product I recommend it for letting the heat out

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

Exterior Upgrades
Jeep JK • 2007-2018 > JK Exterior Upgrades
Jeep JK • 2007-2018
 

Poison Spyder Customs, Inc. is a Proud Member Of:

Poison Spyder urges our customers and ALL 4x4 enthusiasts to join the fight to keep our trails open, and maintain public access to public lands! Please join and support these organizations as well as your local clubs and land-use advocacy groups.

 About Us
 Contact Us
 Privacy Policy
 Customer Service
 Find A Dealer
 Tech Library
 Send Us Feedback
 RallyVenture
 
Reviewed by Accessible360